Konda Aluminum Alloy Wind Knife

Konda Wind Knife

DESCRIPTION

Gaoteng(GOLDENCO)Coanda Effect Wind Knife, this series of products is based on Coanda [ edit ]The new generation of air knife developed based on the principles of effect and air entrainment has the advantages of providing high-speed, stable and high flow airflow. It adopts German manufacturing technology and production equipment and is very suitable for various airflow drying systems and air knife systems. It is widely used in various industries such as ultrasonic cleaning, glass cleaning machines, circuit boards, electroplating parts, coating, painting, non-ferrous metal plate/wire/sheet production for dehydration and drying, as well as for barrier free isolation of harmful gases, dust, hot and cold air, blowing paper on printing paper and post press drying, rapid heating, thawing and high-temperature sterilization of food and medicine,

Product Features

Unique protruding blade, spraying continuous and controllable airflow

◎The length and size of the wind blade can be customized according to customer requirements Customization requested, with a length of up to6m

◎Droplet shape and improved air entrainment design provide high-speed and stable airflow

◎Multiple air inlet diameters and positions are available Choose to meet the requirements of screw or hose connections

◎Can withstand the highest wind speed400 m/sMaximum temperature resistance2 5 0 °CMaximum withstand voltage5kgf/cm2

◎Easy to install,Design of corrosion-resistant and leak proof end caps,Can be used in conjunction with Gaoteng high-speed centrifugal fans and Gaoteng high-pressure fans for application Flexible and convenient

Product size

instructions

1、 Model description of Gaoteng Coanda effect wind blade. Example: Model formula:GTKED-C-A-B-R1/R2-E1/E2,Set the standard size for ordering to500mm,Knife edge ordering Width is1.5mm,The size of the air inlet at the end is76mmThe Coanda effect wind knife can only enter air through both ends [special customization needs to be specified]. The correct ordering model is: GTKED-500-76-1.5-R1-E1

2、 The selection code for the air inlet is:R （R1Representing one end of the wind blade for air intake;R2Representing the intake of air from both ends of the wind blade

3、 Please pay attention to the effective length of the air knife when placing an orderC,It does not include the thickness of the end caps on both sides of the wind blade. The length dimension of the wind blade ordered in the above case is500mm,Not including the side end Cover, its actual length for installation size is508mm。

4、 The unique blade design of the Gao Teng Ke En Da effect fan (one side high and one side low) significantly improves the drying effect of the wind blade. Please be sure to distinguish the installation direction of the blade during installation The lower side of the wind blade is located in the direction where the workpiece needs to be dried, and the same applies to the upper and lower wind blades, which are installed symmetrically.

5、 For orders beyond the above data range, please call our company at:+86 0512-5755 7971perhaps400-030-0607consulting service

matters needing attention:

※ Be careful not to collide with the cutting edge, and use media that do not contain too coarse magazine particles to avoid blocking or damaging the cutting edge.

When the product leaves the factory, the width of the air outlet has been calibrated according to customized requirements. If it is necessary to make changes, please deliver it to the original merchant or professional for calibration to avoid weakening the product performance by self calibration.